Just [Collection] Service Equipment planners and lighting retailers, it is hardly possible as the first stop on light the customer's premises to remain present.
Service Equipment is the magic word ... Tools that facilitate the client to handle the lights.
I offer a telescopic rod to make the safe, simple set of gimbal-mounted lights without a ladder a breeze.
The last operation in the shop is the decoration. Now specifies the operator often hand again to the lights, it sets out the light on goods and decorations.
A surprisingly user-friendly impressed aids in the rush just before the opening, and later during operation.
who provides such a tool to its customers, in proves "think" and can, for example, by applying his contact's positive image transferred to his name, long be remembered.
The three-part telescopic pole made of anodized aluminum pipe was developed from components of the photo studio equipment, so it is also to be robust and professional quality.
When closed only 0.80 m long, so it can hardly be in the way it has to fully extend a length of 2.05 m. This achieves lights up to 4.0 m high.
The head consists of a soft, special heat-resistant rubber (max. 160 ° C), which also makes a light aligning a heated without risk. To paint or protective glasses have to secure " Grip " without damage.
Even when adjusting the emitter can be the effect of the light assess the customer's perspective. Who has experience with such work is at the awkward handling of the ladder and down the high and remember to check.
I provide these useful aids to my customers worldwide renowned textile chains (Hugo Boss etc .)
[Hugo Boss flagship store] scanner a special reference object is the Hugo Flagship - Store Berlin in the Rosenthaler road .
The HUGO designer Volker Kächele designed for the new Shop a model of the inner city, which covers an entire inner wall of the newly opened Shops .
was really spectacular leave the room before installation by the project, this model throughout its size (about 16 x 4m) with a huge "light scanner to exit permanently.
The execution accompanied the architects Tim Hupe
during the technical development we had to take care.
The "generator" should be suitable for continuous use. The "scanner light" should be bluish-white are clear and sharp contrast in store lighting.
Through a sophisticated control technology we provided for smooth, automatic change of direction at the ends of the journey. By track and sliding contacts was moving carriage and the LED spots in Scannerarm powered.
As a publicly accessible area of safety were no risks are taken. The owner has been proven this with a single inspection by TÜV site.
on a mechanical barrier could contribute only minimal force, because the whole area was open and customers. Additional sensors provided for the monitoring of short range (20cm to the moving Scannerarm) and contactless shutdown obstacles.
In the first video I have raised these safety shutdown when shooting for the demonstration purposes.
The safety chain was supplemented by two emergency stop switch.
Overall, they say, is still only close to the limits of the possible task you leave real sense of achievement.
[ Engel & Völkers Lounge] special light - Disk The Engel & Völkers Lounge in Hamburg planned Lightshow large bicolor textile-covered pendant lamps with a diameter of 1.6 m. Classical construction methods proved to be unsuitable for these dimensions, so I went as his own way.
The rest of the lighting (6x circular fluorescent 23W, 12X E27) I placed a self-supporting "circuit board".
All visible exterior surfaces in a lightweight fabric-covered easily modifiable screen modules .
a result, a stable construction, with thin Suspensions , the very acts "floating" and can be easily opened for service and closed.
[A logo] pharmacy signage A well known Challenge in the store presentation:
"is proven and will work, but everything will seem new"
Developed in cooperation with Walter King was a light advertising, which is markedly different from standard approaches.
passers-by in the mall one ECE center on the road, and visitors of an adjacent medical center to use an escalator that leads down to the Mall .
of the escalator can see the entire rectangular storefront overlook the pharmacy.
But they have already seen exciting pharmacy shop window?
Our implementation ... transparent acrylic is using milling contour engraved and this engraving is powered by LEDs from the holding section at the bottom with a red light. The whole thing in a triangle on a VA mounted disk. A revolving stage with power transfer increases the crystal's Association.
I also build such signs as well as synchronized displays for multiple applications within a store with adjustable timing .
